The Study And Transformation Of Honing Controller Of Yuchai Imported Machine

The Cylinder Body is key parts in iesel Engine, bearing to hand over to change complicatedly in the work should dint, along with launch machine toward high speed, enhance, the long life direction development, require with process to put forward more strict for the design and machining of Cylinder Body, it's quality of machining will influence to it's capability of Diesel Engine.especially, the size of the main spindle hole is one key guideline of decide Diesel Engine, so, Honing machine is key and import machine of YUCHAI, it will directness effect the quality and outputs of production of YUCHAI when the equipment have faults.The import honing machine of the 08 line plant of YUCHAI is import equipment by Gehring company in Germany,1994, it's honing the main spindle hole of Cylinder Body in diesel engine. Because the machine used long,the honing controller have also used long,bring contact bad and red alarm, direct or strongly equipment. In all the faults of the honing machine, the question of honing controller is the most. Because, no parts, difficulty to deal with the question, and used long time to repair, have effected production. And we lookup data and ask colleague, know this no the transformation of honing controller in china, so it's a difficult problem. Very obvious, if the research and reformation success, we will Solve the difficult problem of honing controller, and no parts, and the quality and outputs, convenience operate the machine,save maintenance money, and give a way to solve for the technology of the machine.The transformation of honing controller is studied by this paper. Through write PLC program and choosing hardware.as well as analyzing the principle of Gehring honing controller, the transformation is made in this thesis, such as potential meter and encoder. At last, the experimental results agree with the conclusions from the paper successfully offended pass to solve honing to whet the hard nut to crack of the control, solve tool machine to have no spare parts not only, to the influence of the product yield and the quality, again the operation of the convenient tool machine economized a major pen to maintain expenses also, and provided this kind of technique solution of tool machine, obtaining following several results:1,The application of honing technology in Diesel Engine;2,The principle of import honing controller;3,The hardware choice of transformation of honing controller4,The program of PLC to honing controller;5,The user handbook to honing controller;6,The extend and application of honing technology to transformation of honing controller...