Large Silo Deformation Monitoring Mode And Studying On Deformation Mechanism

As it is a structure of high center of gravity, silo will have a mountain affection on its lower support as well as its warehouse wall structure, under these loads(such as wind load, the height of Material storage clinker, the Temperature of Material storage clinker, the sunshine and seasonal temperature difference, etc). Over the years, many scholars mainly deal with the internal force analysis of silo for each factor, but there is rare researches on its external deformation.Each load can cause influence of silo for its deformation, even lead to damage. Above all, the temperature and height of material storage will play a significant effect with the deformation of reinforced concrete silo.This paper make a specific analysis with the relationship of the external deformation of reinforced concrete silo, the height of the clinker and temperature changes, etc, through monitoring and surveying the deformation of reinforced concrete silo in a factory of Shandong, according to the specific quantitative data obtained, as well as the factors, such as the quantity of the material storage and Temperature changes. Some analysis and fitting with a part of effective data is made applying by large data analysis software SPSS and MATLAB Therefore, we can determine the deformation trend of the silo in the whole, which will make a certain accordance for the deformation forecast of such reinforced concrete silo.