Low-temperature Deep Cold Method Of Processing Technology

The low-temperature cold process technology of deep-hole method is to sub-dry cutting technology and deep processing technology, is that the use of compressed air atomized cutting fluid cooling and lubrication cutters in the deep hole processing,wich comebined near-dry technology and deep hole processing technology. Using compresse dair cooling, cutting fluid atomization micro hole drilling method of the chip and tool cooling, Lubrication.The main topic of the low-temperature cold cutting mechanism and theoretical analysis, and through analysis of its cutting mechanism, on the basis of the experimental hole drilling chip shape, chip breaking, cutting force and surface roughness and hardness were studied Low-temperature cold process method proved the more traditional BTA deep hole good. Deep processing of low-temperature cold method for monitoring the vibration experiments, by analyzing the vibration characteristics of the cutting process has been law in the low-temperature cold serious and deep hole machining tool wear debris blocking the abnormal signs of cutting state spectrum. In addition, the analysis of the characteristics of various types of cutting fluid, selected by wear test method suitable for deep processing of low-temperature cold cutting fluid.Deep processing of low-temperature cold temperature changes in the proposed theoretical analysis, and the processing in the deep hole method of measuring cutting temperature.The research projects to expand the scope of green manufacturing, processing to be applied in the hole. Follow-up studies are important to its value.