| In this paper presents a new modular moving house is based on the thought of themodular design. The moving house is composed of modules,roofs and accessories.Module is welded by equilateral angle steel,the roof adopt folding structure. The staticanalysis of load to the moving house were carried in order to grasp the mechanicalbehavior of such structure and single module.The stress analysis in the wind load and snow load to the structure which iscomposed of quadrilateral module and the size is400×600×240mm were carried usedthe finite element analysis software SAP2000. Based on computation analysis,discussedthe force and deformation to overall housing,find out the position of the maximumdisplacement and the maximum stress,determine the section area of the angle steel.The stress analysis in the given load(27.5KN/m2) to the different housing structuremodels were carried used the finite element analysis software. Based on computationanalysis,discussed the force and deformation to overall housing,find out the position ofthe maximum displacement and the maximum stress.And discussed the force anddeformation to a single module,get the stress of the angle steel of the module,verify thestability of individual component. Through the comparative,meet the requirement of thespecifications and the economic requirements,get the shape, size of the module andsection area of angle steel. They can provide a choice for the future research. |
PDF Full Text Request