Research And Design Of The Lighting System Of The Building And Simulation Of Construction

With the development of national urbanization, the residence land of the citybecoming shortage,.There is no doubt that high-rise buildings will become increasinglynecessary and lighting systems as an integral part of the building electrical becomeincreasingly important. Human society makes unceasingly progress of civilization, so thatpeople have many requirements of lighting quality along with the improvement of the lives.In the21st century, energy conservation has become principal focus. As we Know, usingaccurate design, we can not only improve the reliability of using the entire lighting system,but also improve the quality of lighting and achieved the effect of energy saving，achieve thegoal of improving human life quality and the quality of work. However, because of thedefects of the plane design, this phenomenon of a project must be started all over again can’tavoid it in actual construction.There is no doubt that it will be bring greater cost to theconstruction‘smaterials and time.Therefore simulation construction or step three-dimensionaldesign will play the role of energy-efficient construction.This paper consists of three aspects: the lighting system design theory; the examples ofactual design of lighting system; the construction of the lighting system simulation.(1) Theory to guide practice. The lighting system designing theory is the lighting systemdesigning academic support. This paper mainly talks about the choice and application of thelight source, lamp selection and application of the factors that affect the quality of lighting, aswell as to improve the quality of lighting, illustrates part of the requirement of our countrythe standard of illumination of the lighting space, lighting layout, lighting energy-savingmeasures, the entire lighting system control mode selection as well as different lighting loadrating corresponding to the power supply or power requirements for detailed description.It isDescribed in detail how to select switches and wires in the electrical study..(2) Practice is the sole criterion for testing truth. This paper relies on lighting systemtheory, then it guides the actual engineering design and as an example of practicalengineering; this theory is testified in the paper,(3) Construction is the sole criterion for testing working drawing design. This article is simulated construction on the computer software with Autodesk rivet MEP, constructioncontent including installation of electrical equipment, various professional equipmentcollision checks, using material statistics etc, rather than on the construction site to test therationality of the construction drawing or accuracy.