The Design And Implementation Of Electronic Guide System

With the economic development of China, our living level has improved a lot, more and more people choose travelling as a lifestyle, so the tourism industry of our country is developing very much. Our country with vast land has so many places of interest for the travelers, with the development of the tourism industry, however, there also exists some problems, such as the lack of the guide, the mixed level of the guide and the places of interest could not offer the different services to different customers, these all promote the generating of the electronic guide machine. In western world, electronic guide machine has not existed as novelty for a long time, many spots have provided this service. Through the utilizing of the electronic guide machine, noise pollution has been improved a lot. While, in our country, although there has been some development, some museums and attractions have provided the service, the technology still remains the key player state.This thesis introduces a electronic guide system based on ARM, which consists of RFID Guide Machine and Guide Machine Manage System.RFID Guide Machine uses STC89C52as the core, and is equipped with Power Supply module, Wireless RF module, MP3Player module and Power Amplifier module. It is carried by tourists, and we set every spot a RFID that has the only electronic coding which has been set before produced. The Wireless RF module embedded in RFID Guide Machine sends signal time to time, and if the RFID Guide Machine goes into the area of some RFID, this RFID receives the signal and sends the feedback signal, the MP3player module will play the attached audio clips. Thus the tourists will get the better tour feeling.Guide Machine Manage System uses the ARM as the core controller. And Communication module, Network module and GPRS module work with it together. It is set by the administrator. This system can be convenient for the administrator to finish the management. By using this system, administrator can get the needed information on time. Through the Communication module, they can get the messages from RFID Guide Machine and analysis the actual statement, the times of each spot visited. Thus the administrator can make the improvement plan. Through the Network module, they can make the message open and long-range, even be not near the Manage System, administrator can also get the message through net on time. GPRS module is used for sending the information that includes the using situation of RFID Guide Machine. Thus, the producer of the system can ask for the fee. Also the producer can send message to the GPRS module to get the information.