The Anthropometric Data Based On Three Dimensional Clothing Structural Design Applied Research

Body measurement as an important prerequisite for garment production, the development of its technology throughout the apparel industry also played a key role, with the three-dimensional body scanning technology, the emergence and development can be contained within a few seconds to tens of seconds the whole body three-dimensional information on the human body scan data and three-dimensional model, the garment industry of the MTM (that is tailor-made), three-dimensional virtual design, virtual try so dependent on the three-dimensional scanning technology.After the three-dimensional automatic acquisition, how to be more scientific, convenient, accurate and quick measurement of the clothing of the three-dimensional applied to the garment industry to the actual production, for the garment industry is particularly important for the development. At the same time, no matter what kind of three-dimensional measurement of body based on the human body to obtain the data needed for processing, clothing production to find work for the actual size, a reasonable size, exact size and scientific dimensions, for the purpose of this paper is, focusing on research and resolve how to measure the size of three-dimensional body into a scientific and effective use of production problems in the garment industry.In combination with a variety of practices to be described, including the principle of general, experimental preparation, experimental procedure, experimental results, experimental significance, and according to these aspects of the research. Summarizes the current circumstances of three-dimensional body measurement, and three-dimensional body based on how the data collected automatically applied to clothing design in the past, and through its own analysis of practice and concluded that to confirm, and then to study and elaborate three-dimensional body based on the current measurement techniques to obtain specific data processing and transformation methods.By automatically collecting three-dimensional human body based on the size of the data obtained by research and analysis described, by comparing three-dimensional body size in the clothing of science into the industrial processing, and the form of charts that show their point of view, summed up a set of clothing production for business transformation in the application of structural design method for three-dimensional body measurement size of the data in the garment production process of the actual application of structural design to provide a reference methods and opinions.