Technical And Economic Analysis Of Ground Source Hear Pump Air Conditioning System In Strawberry Industry Core Area

In recent years, with the problem of resources and the environment seriously increasing, the rational use of natural resources, environmental protection, and reducing conventional energy consumption have become an important issue to related industries, in order to meet people’s health and living requirements. Ground Source Heat Pump is a shallow geothermal resources, underground earth (also known as geothermal energy, including groundwater, soil, surface water or city water, etc.), which can provide both energy-efficient heating and cooling air conditioning. By entering a small amount of high-grade energy (eg electricity), the Ground Source Heat Pump uses the tubes laying in the soil, surface water to achieve high-grade low-grade heat to heat transfer, so as to achieve the effect of air conditioning. Geothermal energy as a heat pump, respectively, in the winter heating and summer air-conditioning heat cold source, ie in the Winter, the pump "takes out" the heat from geothermal energy to raise the temperature, in order to provide sufficient indoor heating; in Summer, the it can extract heating out of the room, then release it to the low energy. Ground Source Heat Pump System takes full advantage of the temperature constant characteristics of underground soil, use such a renewable and clean energy to achieve the winter heating and summer cooling of the two functions. Since no extraction of groundwater, the Pump only based on the PE pipes buried in the soil to exchange heats. In the winter, to extract heat from soil as an energy source, the Pump led the winter significantly reduced operating costs without any pollution in the operating process.Take the example of ground source heating pupm system in Changping Strawberry Core Area, this paper introduce its characteristic, analyze the economic benefits and the social benefits, detailed figure out the advantages of energy saving and environmental protection of the equipment, in order to achieve the new product’s wide spreading and application.