Font Size: a A A

Simulation And Optimization Of Small Horizontal Axis Wind Turbine

Posted on:2014-05-28Degree:MasterType:Thesis
Country:ChinaCandidate:D H SongFull Text:PDF
GTID:2252330401985107Subject:Mechanical Manufacturing and Automation
Abstract/Summary:PDF Full Text Request
The efficiency of the wind turbine is a very important factor of wind turbines, it’swind turbines converting wind energy into electrical energy capacity, which leaves theexterior design is the most important factor for the efficiency of wind turbines.First, an impeller diameter of1m small wind turbine is measured, and use Pro/E,Solidworks3D software to model and smooth surface. Data of wind turbines is saved byX_T file after completion of the three-dimensional software modeling, and then import theX_T file into ANSYS to modify model and the next step, meshing, boundary adjustmentsetting, computational fluid dynamics, results View results. Results viewing includetorque of wind turbine, turbulence of wind turbine, change of wind speed under a certainwind speed of speed impeller. Using wind speed, torque of wind turbine can it get thepower of wind turbine。Secondly, test the original wind turbine by using wind tunnel of Taiwan Yang DingIndustrial Co., Ltd. Test and record the data current, voltage and power of the originalwind turbine by PROVA scenery electrical tester and AVM-01anemometer. Themeasurement data proves that the original wind turbine simulation data unanimouslyconfirmed that the simulation is accurate. The original wind turbine generator motor istested by Taiwan Electrical Industrial Co., Ltd. The test condition is that a DC voltage48V motor drives the rotation of the original generator motor to record voltage, torque,efficiency data at different speeds.Finally, the use of traditional formulas based on the parameters of the original windturbine rated power of the motor design blade radius, angle of attack, the installation angle,a reasonable choice airfoil and complete in Pro/E, Solidworks modeling then import intoANSYS calculations Viewthe at different vertical windward wind speed and the impellerspeed impeller to get the torque generated by eddy currents and other data. Under samewind speed, the rotor speed of the new design blades is about half of that of the originalsmall wind turbine. And, combine the data of the original wind turbine generator motorand the data of the new design blades of wind turbine can get the biggest power in realityis34.11w.
Keywords/Search Tags:a small horizontal axis wind turbine, wind tunnel test, design blade, finiteelement simulation
PDF Full Text Request
Related items