Based On The Research And Ergonomics Improvement Research For Test Of Reinforcement

With the rapid development of Chinese economy, the reinforced test has become an important part in the construction of various engineering. Inspection institutions tomeet the growing demand of reinforced test, you need to have a good test of reinforcement process. Due to the current test of reinforcement process of each inspection agencies be, not fully play inspection agencies inspection, theinspection body lost its advantage. So it is very urgent andimportant to research on Optimization of reinforced testing process, by using the basic method of industrial engineering analysis, research on how to improve the reinforced testprocess flow, improve the inspection efficiency, which is very realistic significance.Work Study and Ergonomics are interrelated and indivisible. The main research work is to test the process, but the testing process and the testing machine is again composed and advance, and therefore improve test efficiency while to fully consider the human factor. Similarly, human factors engineering research though with more consideration of human research, but it is built on the basis of improving operational efficiency, and simply looking for comfortable, accurate and efficient from the actual testing environment and the efficiency of research can not be executed. Only a combination of both in order to give full play to the enthusiasm and initiative, in order to effectively improve test efficiency. Firstly, the situation on the steel to make the overall analysis test by test test status and reinforced concrete products inspection institutions reinforced stage process analysis leads to the inspection process and the reasons for the problems. On this basis, the use of research and human factors engineering work on the steel inspection process in all test items were optimized. Through the examination room equipment layout optimization, the specific operation of the equipment during the test specification, inspection personnel and testing equipment with proficiency and improvement of the environment on the steel inspection, inspection personnel in order to improve safety, comfort, inspection the accuracy and efficiency of the test of steel.This not only stay in the theoretical discussion stage and learn from the current inspection process reinforcement of practical experience, according to the specific circumstances of reinforced inspection work combines research and human factors engineering to develop a reasonable inspection process, the introduction of scientific management methods, with a strong operability testing according to the specific circumstances of rebar reinforced test items (sample preparation, chemical composition testing, mechanical properties testing, bending performance testing, dimensional inspection) work using human factors engineering research and theory of the rational optimization, improved test efficiency, but also reduce the reinforced inspection in the operator’s labor intensity. For the same industry in other similar products inspection also has a certain significance.