The Study Of Dynamic Monitoring System Of Enterprise Energy Metering Based On ZigBee

Accompanied by the rapid development of microelectronic technology, computernetworks and communication technologies, information systems used in various corporateunits, however, the traditional energy metering is not only time-consuming andlabor-intensive, there is no effective accuracy and timeliness. Dynamic monitoring system ofenergy metering based on wireless communication technology can improve work efficiencyand enterprise energy data timely and reliable is sent to the management center. From21stcentury, wireless communication technology is more widely used because of its advantages oflow cost, flexible networking and limitless geographical environment. However, in wirelesscommunications technology, ZigBee technology because of its low-cost, low-power, lowtransmission rate and transmission reliability advantages, widely used in the field of industrialautomation control and remote data transmission, etc., and it applies to the communicationtransfer rate low requirements system.In this paper, based on the traditional energy metering, ZigBee technology has been putforward for energy metering solutions. In this article, ZigBee coordinator, router, certainenergy meter as terminal nodes constitute energy metering network. The program combinesCC2430chip and embedded system, sending, receiving and processing data to achieve theacquisition of energy data, enabling the remote control. Content includes:(1) the application of ZigBee wireless communication technology to the dynamicmonitoring system for energy metering. In this paper, the characteristics of enterprise energyusers concentrated selected emerging wireless communication technology ZigBee networkingtechnology as an energy metering system.(2) Study ZigBee technology, analysis ZigBee stack architecture, use ZigBee meshtopology.(3) Design energy metering system hardware based on ZigBee technology, selectthe SoC chip CC2430.(4) Design energy metering system software. Introduce the software developmentprocess and the preparation of the acquisition of ZigBee collector node, the program to the electricity value, ZigBee coordinator node and the main program of the ZigBee router nodes.(5) The routing algorithm is introduced into the neighbor table, design improved energybalanced routing tree algorithm.(6) Configure the energy metering monitoring center software, new configurationworks, configure the serial port parameters and the terminal interface.