Research On Whole Process Of FOTON Automobile Body Dies Project Development

Starting from mold development situation inland and abroad, this article’s main contents involved the project body mold development process, including project background, project management, process scheme, DL design, CAE, CAD,3D entity total prefabricated die structure design, FMC processing, mold manufacturing, mold assembly, mold adjustment, gauge, mold acceptance process etc. based on the research of the project in FOTON mold co., LTD.On the basis of the project, summarized the whole development process of the automobile panel dies. Make the mold have better fabrication procedure, better machining process, better convenient operation, through the optimization of process design and die structure design and other effective measures. Achieve the purpose of shorten manufacturing period, cost reduction. Ensure the project to develop efficiently with high quality and improve the brand reputation of the enterprise.This paper also summarizes some important contents, which is worthy to reference and to enhance the competitiveness for modern enterprise, including some methods of Project Management like Concurrent Engineering, mold structure proofreading, some methods of Knowledge reserves like PDM, design flow and operating points of DL drawing, FMEA analysis, some key technology like mold adjustment process, gauge design.All in all, this article accumulated a lot of mold project development experience and the experience of mold design by the project. It has important practical economic significance for FOTON and the same kind of company.