The Research On The Better Configuration Method Of Vertical Transport Machinery In High-rise Building Based On The AHP

City building high-rise development has become the main direction of development ofthe social construction. To the high development of high-rise buildings, large scale, thecarrying amount of building materials, construction personnel work concentrated in theconstruction process, construction garbage. At present, a lot of the vertical transportmachinery of various transportation. The speed of construction of high-rise buildings in acertain extent of vertical transportation speed, to the construction of materials needed,therefore, the vertical transport machinery configuration plays an important role inconstruction organization. Domestic and foreign scholars on the vertical transportmachinery selection, hire purchase decision and safety construction of a large number ofstudies, however, due to the impact of diversity of vertical transportation machineryconfiguration factors, there are still some problems to be further studied. In this paper, thevertical transportation machinery allocation problem, type of survey, vertical transportationmachinery of various parameters, Collecting large amounts of data, according to theconfiguration principle, as well as the advantages and disadvantages of variousconfigurations, using analytic hierarchy process, AHP structure model are established, bylaw, differencemethod, and solve the commercial law and difference method are compared,analyzed the causes of the differences between the two calculation methods, data oncollected on the basis of the correction, re use of commercial law andmethod ofconstructing judgment matrix, using data processing software Matlabto calculate the levelof weight of the factors affecting the sort and theconfiguration scheme comprehensiveevaluation coefficient, preferably a high-rise building vertical transport machineryallocation scheme provides a method. The main research contents are as follows:1. This paper summarizes the research status at home and abroad for vertical transportmachinery use, summarizes the decision analysis methods, based on the previous studies,proposes the research contents and research methods.2. This paper introduces the main types of vertical transportation machinery at present,analyses the advantages and disadvantages of various verticaltransport machinery, analyzesthe construction of high-rise buildings, the mainconfiguration principle should beconsidered in the selection of vertical transportation machinery allocation scheme, and themain configuration at the present stage.3. Introduces the basic principle of analytic hierarchy process AHP method andbasicsteps of decision, according to the principle of vertical transport machineryconfiguration analysis, the influence factors on the decision of vertical transportation machineryallocation scheme are discussed, the12factors influencing the hierarchy structure model isbuilt, and collected data through the questionnaire survey method, the law and method tocollect data, respectively,construct pairwise comparison matrix, use Matlab software builtcomparison matrix is solved, the results are in good agreement with the engineeringexample, the hierarchical structure model is established under test is effective.4. To solve the commercial law and the difference method and the resultswerecompared, analysis of the causes of the differences between the two calculationmethods, to analyze the collected data on the basis of the correction, were using thecommercial law and difference method for solving the hierarchy structure model, putsforward some reasonable suggestions for the construction unitreference.