Study On “One-fold” Paper Material Package Modeling

Along with unstoppable development of human society, people's life has been enriched gradually. While the commodity is the indispensible living material for the development of human, the pattern of packaging has also been becoming increasingly diversified, thus a lot of living materials will be consumed. While enjoying the convenient life brought by science and technology, people are also confronted with problems. For example, due to human's excessive exploitation of natural resources, the regeneration speed of resources is far falling behind the consumption speed of human. Therefore, the natural world often gives us the red light.However, the commodity, as the indispensible material for the survival of the human, brings about excessive resource load to the natural world.Paper material, belonging to green material, features strong plasticity due to the characteristic of decomposition and regeneration, wide resource rate of raw material and low cost. It is widely applied into packaging. However, due to people's excessive abuse, a series of problems are caused, like excessive packaging, low recovery rate of material, and secondary waste, etc. To satisfy consumers' demands, the manufacturers often use the“two-fold” structure for package so that the packaging style is rich and beautiful for“one-fold” packaging is certainly limited to modeling and not as beautiful as that of“two-fold”. However, under such situation, the excessive packaging is brought. Therefore, the structure and modeling of “one-fold” paper packaging is analyzed to tap the essentials of design points which are not highly valued designed to fabricate model that is as beautiful as that of “two-fold” packaging. According to the packaging design, the main compositions of packaging modeling are revised and designed.The investigation and analysis design of “one-fold” paper material packaging modeling is carried out in this paper to implement that of packaging modeling by changing the modeling structure and superficial visual effect of packaging in the hope that packaging style with beautiful modeling could be fabricated and the waste of material could also be reduced and the social burden could be mitigated through modifications based on investigation of“one-fold” packaging modeling. In addition, the consumers could be attracted to increase the sales volume of commodity and bring about good benefits to the merchants.Ultimately, the common packages in the market are discussed and analyzed.Additionally, the beauty design of outer structure of packaging is revised and corresponding design cases are verified and designed.