The Conceiving And Parametric Design Methods Study Of Folding Architecture

Fold state building and folding building are in fact two different construction types,but because of English in "Folding" is also included "folding" and "bending" two layers of meaning,so when introduced into China.It is often synonymous with the two kinds of meaning,which resulted in the confusion of the concept.Folding state building more emphasis on the "folding" technique and state,has the obvious creases.The fold building is more inclined to "bend" form,the surface is smooth and continuous,the unfold after and can keep original structure,and through after folding operation,it will destroy the original structure,the process is irreversible,so the principle of the two,and the formation mechanism is different,in the description,the two cannot be replaced by each other.This paper is folded state building and the construction be underway differentiate and analyze,both from the architectural form,or from the generation logic are there is a big difference.Folding state building and the folding building is to fold the basic geometry of "folding" and "bent" operation,is a complex,nonlinear space form,beyond the scope of Euclid's geometry,is using traditional design method,difficult to be accurately described.Therefore,in order to better the two generation principle of research,citing the parameterization design method,the method of parametric design is more and more adopted by architects.Not only brings a new design language for the construction industry,but also changed the traditional way of thinking.The parameters of the data information management is good at,has a strong logic,which can solve the problem of complex shape folding state building and fold building state building.Through parametric design platform,the both of them process is simulated and analyzed,and then summarize the design method based on parameterization is.This paper is based on the folded state and fold building type carry out,early by the method of reading literature,the two source of ideas,characteristics,architectural practice carried out,to distinguish between the two theoretically.On the basis of,through the use of a parametric design and of their generation process were simulation and analysis from the methodology of generative mechanism distinguish finally involved in the actual project,to discuss the parameters design of generation folding state and fold the building to be used in the practical engineering,this description is based on the parametric design to generate folding,fold shape is feasible and has practical significance.