Research On Intelligent Street Light Control Based On ARM

With the rise of the Internet industry,Internet of things gradually into people's lives.people pay more and more attention to the energy waste problem,aware of the importance of sustainable development.Is very close relationship between Electricity and our lives,how to improve the efficiency of electricity is a topic of general interest.Especially now that people are so rich nightlife,the lighting system is an essential part of our lives,so the development of an energy-efficient lighting system for the rational use of our energy is very important.Each part of China's economic development now is different electricity also varies.In some developed areas energy used is very large,relatively intelligent lighting systems can achieve some of the automatic control and detection.But in some poverty-stricken areas lighting system is relatively simple,just use simple sensors to control lights switch,and some are even artificial direct control.Whether in developed areas or poor areas of these two lighting systems can not achieve centralized management,we need to spend a lot of manpower and material resources.Therefore,the design of an efficient and intelligent lighting system is very meaningful.So we designed a remote street light controller based on ARM,the controller is based on ARM core control chip,it could control and monitor intelligent and efficient multiple-loop simultaneously.Remote communication via 3G module,real-time view street situation and control the lights off.it has Another current voltage and power monitoring capabilities for remote add up consumption and electricity consumption.The works are mainly used DXP tool for mapping and routing PCB circuit diagram,write and compile the drivers under LINUX system.Finally,by using multimeter and oscilloscope complete each part of the FBI.After testing the work to achieve the desired effect,it is stable and can operation for a long time with high reliability.