Bulk Cargo Port Energy-saving Control System Of Belt Conveyor

At present,bulk cargo port construction,belt drive motor power is to meet the conditions to start with belt machine design,but in the daily operation process,belt drive motor power is very "excess",aiming at the above problem,combined with the port of loading and unloading process characteristics,the energy-saving research from the belt machine running,start and stop three aspects.Firstly,the paper introduces the common energy saving technology of belt conveyor system at home and abroad at present.Then,in view of the present domestic bulk cargo port belt machine operation present situation has carried on the concrete analysis,the research.According to the operation of the conveyer belt in the process of motor power surplus problem,firstly with dual motor drive as an example,the "dual boot,single operation" carried out a feasibility analysis on the working principle of the clutch are introduced in detail,and then the "dual boot,stand-alone operation control was introduced in detail.The loading and unloading process of main bulk cargo port is analyzed,and the starting and stopping control mode of the belt conveyor system is optimized,and the operation time of belt conveyor is shortened.This paper introduces the configuration method of iFIX software,and IFIX software is used to realize the control effect of the energy saving measures,and through the comparison of measured data,obtained using the above measures can really achieve the purpose of energy saving results.