Design Of Grape Vine Digging Machine

In Chinese northern areas,at the winter cold and dry,in order to avoid the vines appear frostbite or dry phenomenon,for the vines to take appropriate measures to ensure the safety for the winter,the vines are put down after buried up out of the clay is buried grape vine,stay will be the end of the winter clean soil namely grape vines.At present,a lot of grapes up cane for manual operation,work load is big,the efficiency is low,the serious influence the development of the grape industry.This article to grape vine operation as the goal,to grape vine working conditions and working process are analyzed,on the basis of grape plant protection machine,using "soft" mode of operation,has designed a new type of grape vines machine.This machine is composed of rigid bulldozing plate and the flexible cleaning plate,as an aid in the operation of all-in-one device,powered by all-in-one and manipulation.Take cane machine working process,by bulldozing plate to remove most of the overlying soil rigidity,flexible cleaning the plate to remove surplus turns the soil,when the bulldozing plate and clean the dish can automatically avoid the cement column.According to the pattern of grape planting in Ningxia region,the key technical parameters of the whole organization are determined.The design and analysis of the key parts of the machine of the machine and the plate brush mechanism are carried out,the strength check is carried out,and ANSYS software is used to analyze the bulldozers.Based on Solidworks software,the building of parts and machine entity models.According to the work requirements,the rattan machine are analyzed and the design of hydraulic system,and formulate the hydraulic principle diagram,determine the relevant technical parameters,completed the selection of hydraulic components,and carries on the check.The machine is able to meet the technical requirements of the vines and is expected to be able to finish up to 10 mu of the work per hour.