Design Of OpenADR Communication Specification Conformance Test System

Under the dual pressure of environmental problems and lack of resources,smart electricity and DSM will be the main subjects in the world.At present,China’s government departments promulgated a series of corresponding laws and policies to promote power demand side management,power system reform.Demand response as an important measure of electricity consumption and an important means of power demand side management,its research will be the focus of the future development of smart electricity.But there is no official demand response international standards.Open ADR is an open automatic demand response communication protocol that converts price and event information into load reduction or transfer information and communicates it from the supply side to the demand side efficiently,securely and easily through the communications infrastructure.Utilizing the Open ADR protocol will facilitate the electricity consumption,power demand side management and other work to carry out.At present,Open ADR has been recognized by many countries and organizations in the world,and the development of demand response in China will not be separated from Open ADR protocol.As the focus of Open ADR protocol research,this paper studies the conformance test of Open ADR protocol and designs Open ADR conformance test system.Open ADR protocol and conformance testing are studied in this paper.Open ADR test suite,test case set and test method are designed according to ISO / IEC 9646.Then,the requirements analysis and overall architecture design of the Open ADR conformance test system are carried out.On this basis,the test environment configuration module,the test case module,the system man-machine interface,the test execution module and the result feedback module are designed.Finally,the local test,remote test and result analysis of the protocol service instance are carried out to verify the usability of the test system.The research of Open ADR conformance test system is helpful to improve the interoperability between demand response system and equipment,and can lay a good technical foundation for the development of demand response in China.