Research On Standardization Of Assembly Type Decoration And Decoration Products

With the promotion of relevant national policies and vigorous publicity,more than 30 provinces and municipalities in China have issued independent guidance and related supporting measures for assembly-type buildings.Many cities have made clear plans for the development of fabricated buildings.Claim.The traditional decoration and decoration method,along with the development of the times,the problems have gradually surfaced,the improvement of people's living standards,the consequent demand has also increased,and the problems have become more and more exposed,such as low construction efficiency and products.The scene is messy,the construction period is long,the protection of the environment on the construction site is not up to standard,and so on.The real estate industry is developing rapidly,and people have higher and higher requirements for the quality of building decoration parts,product selection,construction speed,and environmental impact during construction.The standardization of prefabricated building decoration and decoration is being vigorously promoted,but the selection of products and parts is weak.It can be seen that the development of standardization of assembly-type building decoration products is imperative.Although the current assembly and assembly architecture decoration and decoration is vigorously developed and promoted,the relevant standards and management have not been well followed,and there has been a clear standard speed that has not kept pace with the development speed.Take the assembly type decoration and decoration product selection as an example.The assembly decoration and decoration products are multi-material,multi-style,multi-size and size.How to ensure the effect of the assembly decoration and the efficiency of construction work has become a new problem.The paper analyzes the background of the current assembly decoration industry,compares traditional decoration and assembly decoration,and has raised some existing problems;introduced some related theories and combed the building types,product types.Style type;combine the theory of essence,modularity and other aspects of assembly and decoration,reclassify the assembled building decoration products,and present cases to demonstrate.Using the Welman model and the Hall three-dimensional structure,a standardized model for the selection of fabricated building decoration products was proposed,and the implementation mechanism and evaluation model were proposed.Finally,suggestions and prospects for the future development of standardization of assembly decoration products are proposed.The attempt can play a role in guiding and helping the standardization of the selection of fabricated architectural decoration products.