Research On Collaborative Management Of F Engineering Project Based On BIM Technology

With the development trend of complexity and large-scale engineering construction projects in China,the traditional management mode has been unable to meet the current high standards and strict requirements of engineering project construction,especially the problems that often occur during the engineering design and construction stages,which have always plagued engineering construction Practitioners.As engineering design involves a variety of business formats such as business,hotel,and office buildings,if one of the majors changes the drawing,the other majors may also change the design plan.For example,if the design plan for the water supply and drainage specialty changes,the design plans for the HVAC,electromechanical,and structural disciplines should be checked accordingly to determine whether changes should be made.Problems such as quality management,schedule control and cost management are also prone to occur during the construction phase.With its unique advantages,BIM technology is widely used by engineering construction practitioners at home and abroad.Therefore,this article uses BIM technology to solve a series of practical engineering project problems in the engineering design and construction stages.The main research work of this paper is as follows:First of all,based on BIM technology and collaborative concepts,through existing applications and theoretical studies,it is concluded that the current technical advantages of BIM in construction engineering project management and the advantages of collaborative management provide a theory for engineering project management based on BIM below.Secondly,the F project is introduced,and theoretical research is applied to engineering practice.Full consideration is given to the problems in the project management in the design and construction stages at the initial stage,and the problems are described and analyzed in detail according to their causes.In terms of cost,the in-depth analysis of collaborative project management based on BIM is made,and through comparison,the problems that can be solved and the existing advantages are obtained.Subsequently,the problems in the design stage and construction stage of the F engineering project mentioned above were mainly applied to the collaborative management based on BIM technology in engineering practice.The BIM technology was first applied to the collaborative management of the design of the F engineering project,and the problems caused by the poor inter-professional design phase were effectively solved through visual analysis and collision check optimization;then,the BIM technology was applied to the quality,schedule,and cost of the construction phase Perform collaborative management,and demonstrate and explain some of the problems in the quality,schedule,and cost of the construction phase of the F project.Through comparison and reflection,its application value in the design and construction phase of actual engineering project management.Finally,the implementation effect of the F project in the design and construction phase of the collaborative management based on BIM technology was achieved,and the implementation effects of cost reduction and efficiency,time saving and management improvement were achieved;and to ensure that the management method can be effective Technical,personnel,and institutional safeguards.