| The application of industrial engineering technique in aluminum formworks manufacturing industry is meant for improvement in Hunan Sanxianghe High-tech Co.,Ltd.However,most of manufacturing industries want to be more flexible in production by reducing the wastage source,so that the company can met the consumers' request.Currently many of the manufacturing industries are not capable to accomplish this flexibility due to the bulky setup time complicated in the production process.To overwhelm this complexity the lean manufacturing tool single minute exchange of die(SMED)which is one of industrial engineering technique is applied in this thesis project to the major production cycle time.As an outcome was shown,the total manufacturing cycle time is reduced from 31 minutes and 33 seconds to 18 minutes and 33 seconds.The company started manufacturing the number of components improved from 195 to 255 per day and the number of components per months increased from 4,680 to 6,120,whereby the total savings time to performed the operation about 41.5% is accomplished by implementation of SMED.Furthermore,the main purpose of this work is to evaluate the annual production capacity aluminum formworks and to reduce the total manufacturing process cycle time for the product in in Hunan Sanxianghe High-tech Co.,Ltd.,the results obtained in term of annual production capacity by choosing 350 mm × 1500 mm flat formworks in accordance with the manufactured base on standard JGJ 386-2016 showings that the flat formworks is manufactured more than corner formworks in in Hunan Sanxianghe High-tech Co.,Ltd.Hence,the Bar Chart and 3D modeling were adopted for the evaluation of production process cycle time,the annual output and the components in manufacturing process of aluminum formworks. |
PDF Full Text Request