Quantitative Analysis On China's Interregional Manufacturing Transfer Stickiness

Under the new normal economic situation,in order to solve the problem of slow economic growth and achieve industrial transformation and upgrading,the government should promote manufacturing transfer.By the domestic and international grim situation of the two-way squeeze,the government has long been aware that the development of China's manufacturing industry can not only rely on foreign direct investment,nor can it directly promote the transformation and upgrading of the manufacturing industry.They should fully rely on the already formed economic stance to transfer the manufacturing industry,and then improve production efficiency to achieve the optimal allocation of resources through the transfer.It's the best way to access to the development of the industry by leaps and bounds of their own kinetic energy,and ultimately gradually to achieve the transformation of the overall transformation of the manufacturing situation.So,the government promulgated a package of industrial transfer policy.In fact,despite the support of supporting policies,the practice of China's manufacturing transfer is not smooth,and the implementation of industrial gradient transfer theory failed to obtain good results.Under the influence of combination of multiple factors,the regional transfer stickiness has become an important problem of China's economic development.What is the current status of stickiness? How does the viscosity level of the provinces affect production performance? Is the viscosity present reasonable? How does stickiness form? And how to properly promote the transfer of manufacturing? It's the important task of the main body about manufacturing transfer to answer this series of questions.Firstly,this paper combed the domestic and foreign related research on industrial transfer.Secondly,by choosing the method of measurement on viscosity,the paper analyzed the present situation of the transfer viscosity in China's manufacturing industry.It is found that the viscosity coefficient of China's manufacturing industry is increasing at the present stage,but the viscous coefficient has significant spatial differences and industrial differences,and the viscous coefficient in the eastern region shows obvious convergence trend.Thirdly,through the construction of the threshold panel model,the influence of the fixed asset investment on the production performance of the manufacturing industry under different viscous levels is taken as the criterion,and the rationality of the existence of the viscosity is analyzed.The empirical results show that the influence of the regional transfer viscosity on the production performance with a three-threshold effect.Recently,there are more than a half of provinces in the unreasonable range of the viscosity level.Then,the theoretical analysis and empirical test of the main factors affecting the viscosity of the study results show that: profit level,degree of marketization,local protection and sunk costs have a strong effect on the viscosity,and R & D investment,logistics level,resource endowment has a weakening effect on the viscosity coefficient.Although the increasing of tax will reduce the viscosity,the effect is not significant.Finally,recommendations were made for provinces in different viscous intervals.The innovation of this paper is to distinguish the nature of stickiness in each region,and analyze the factors of affecting stickiness from multiple perspectives,and provide a way of thinking for promoting the transfer of manufacturing accurately.