The Economic Feasibility of an Integrated Woody Biomass Harvest In the Missouri Ozark Highlands

Questions have risen in recent years regarding the impacts of biomass harvesting for renewable energy production and on the cost and efficiency of biomass harvesting using different harvest equipment configurations. Missouri has a set of Best Management Practices (BMPs) to guide woody biomass harvesting. This study will address the different results (mainly cost and production data) that come with incorporating various BMPs and how costs and revenues can vary when implementing these different management practices. This study applied two silvicultural treatments and a control to 72 acres of oak-hickory stands comprising poles and small sawtimber-sized stems of primarily white oak (Quercus alba) and low quality black oaks (Quercus velutina) in the Missouri Ozark highlands. Treatments were: 1) clearcut to establish a new cohort of trees and 2) intermediate thin in an attempt to improve residual stand quality, in which both small diameter trees and merchantable sawlogs were removed. Both treatments used a mechanized, integrated harvest approach. Each treatment had 3 sub-treatments (clearcut had 4 sub-treatments) that called for leaving varying levels and types of residues on the ground to maintain soil nutrient pools. Trees were merchandized for the highest value possible, with biomass chips produced from limbs and tops or stems that were otherwise unmerchantable. A system feasibility analysis was implemented to determine productivity, costs, and prices needed for economic feasibility. An average of 49.4 tons of SHWP and 10.9 tons of fuel chips were removed per acre at an average cost per ton of...