A Coal Mine In Luxi County, Yunnan Occupational Protective Equipment Design

At present,90%of China’s coal mines underground mining, coal production in the wholeprocess are accompanied by the production of dust (including dust, mixed dust, rock dust),the production of poisons (including TNT, lead, benzene,), harmful physical factors arsine,mercury and its compounds (including geothermal and heat, noise and vibration, radiation,etc.), toxic gases (including methane, carbon monoxide, carbon dioxide, ammonia oxide,sulfur dioxide, hydrogen sulfide, ammonia, phosphorus compounds), adverse weatherconditions (including ventilation, lighting, lighting, temperature, humidity, wind speed),water quality (including mine water, industrial water) and other occupational hazards, causedsome workers suffer from varying degrees of silicosis, coal workers’ pneumoconiosis,occupational poisoning, heat stroke, radiation sickness, vibration disease, deafness and otheroccupational noise. May2002<People’s Republic of China Occupational Disease PreventionLaw ">into effect, production safety supervision and management departments at all levels toactively carry out construction projects around the "three simultaneous" review of newconstruction, renovation, expansion of occupational protective equipment to carry out theconstruction project design review, controlling occupational hazards from the source. China’scoal industry has created and formed the Institute of Coal medical center, each PBM basedvocational institutes anti-labor health occupational disease prevention network.This article will be based on laws, regulations, standards and norms, the competentministries approved construction documents and project feasibility report, occupationalhazard assessment report and hygiene audit opinions, and occupational hazards for a coalmine in Luxi County, Yunnan production system, technology for more in-depth analysis,research mine various occupational hazards in the workplace, exposure to variousoccupational hazards workers situation. By analogy works on mine workplace occupationalhazards classification.On this basis, the mine occupational protective equipment to carry out the overall designlayout design, production technology and equipment layout design, various occupationalhazards CHP facility design, or sanitary facilities design, through to design and construction,completion of construction and commissioning of occupational protective equipment, to theoccupational hazard control objectives within the expected results.