Energy Saving Of PVC Gloves Industry

PVC gloves base on PVC paste resin and additives as raw material,form by using gloves model impregnation process,high temperature curing.This process due to production recipe adjustment flexibility,performance improvement space can produce varieties product to meet the special requirements of different industries.PVC gloves industry market growing very obvious.From the development trend,PVC gloves will gradually become the dominant product in disposable gloves field.But PVC gloves industry is an emerging industry in China.Because the industry's production technology is not fixed,process equipment is non-standardized of.hindering the industry's technology exchange,none universities and research institutions specially do the technology of this industry,limiting the industry technology to enhance the speed.Therefore,so the whole industry technical level is not high,upgrade technology progress is slow.Under the influence of the appreciation of the RMB,raw materials and energy prices rising,the cost of production of PVC gloves are growing,industry profits are squeezed.The enterprise with strong technology development capabilities,perfect management system,scale and cost advantages have a stronger competitive edge in the market.This topic first comprehensive study on PVC gloves production line of Shandong Blue Sail Plastics Co.,Ltd.,to establish the energy balance model based on the actual operation of the production line.Collecting relevant data and doing energy balance calculation of the entire production line,the comprehensive analysis of PVC gloves production and energy use,doing comprehensive analysis to energy consumption of PVC gloves production;Secondly,doing PVC plasticized experiment and PU drying experiment by simulating actual production process of PVC gloves to provide a basis for reducing energy consumption by improving conditions;Finally,in the basis of experimental data to comprehensive analysis of the use of PVC gloves production energy,PVC plasticized experiment and PU drying experiment,respectively,were search the energy-saving insulation,the oven energy conservation,waste heat recovery energy conservation,discussion on the process of steam as the heat medium,energy-saving of control and management et.al aspects,and propose a variety of energy-saving ways to reduce energy consumption,improve the enterprise's cost advantage and market competitiveness.