Distributed Control System Design Of Ethoxy Magnesium Production Equipment

Catalysts play an important role in chemical production,even under difficult conditions,industrial production is achieved under the participation of catalysts.At present,the production of many chemical enterprises is still in a low state of automation,and the raw materials used in the synthesis process of the catalyst are mostly toxic or corrosive substances.In order to improve the production efficiency of the catalyst and ensure the safety of production,a set of distributed control system(DCS)is designed and implemented to realize the automatic production of ethoxy magnesium catalyst in accordance with the production process control requirements of a chemical plant.This distributed control system system mainly controls the process parameters such as temperature,pressure,flow rate and mass volume in the production process of ethoxy magnesium catalyst,as well as the automatic control of the production process.The system is divided into two parts:the monitoring layer and the control layer.The control layer realizes the collection and control of the parameters through the MDCS intelligent component.The monitoring layer communicates through the network card and the control layer,and realizes the real-time data monitoring,the production process and the control loop hand automatic switching,the parameter setting,the historical data record,and the fault through the FIX configuration software.Alarm and other functions.The automatic control system for the production unit of ethoxy magnesium catalyst has been operated in a chemical plant,and the control requirements of the manufacturer are fully met.The production of ethoxy magnesium catalyst can be ensured safe and efficient.