Multiobjective coordination models for maintenance and service parts inventory planning and control

many equipment-intensive organizations in the manufacturing, service and particularly the defense sectors, service parts inventories constitute a significant source of tactical and operational costs and consume a significant portion of capital investment. For instance, the Defense Logistics Agency manages about 4 million consumable service parts and provides about 93% of all consumable service parts used by the military services. These items required about US;This research investigation specifically considers the aspect of joint maintenance and service part inventory optimization. We decompose the joint maintenance and service part inventory optimization problem into the supplier's problem and the customer's problem. Long-run expected cost functions for each problem that include the most common maintenance cost parameters and service parts inventory cost parameters are presented. Computational experiments are conducted for a single-supplier two-echelon service parts supply chain configuration varying the number of customers in the network. Lateral transshipments (LTs) of service parts between customers are not allowed. For this configuration, we optimize the cost functions using a traditional, or decoupled, approach, where each supply chain entity optimizes its cost individually, and a joint approach, where the cost objectives of both the supplier and customers are optimized simultaneously. We show that the multiple objective optimization approach outperforms the traditional decoupled optimization approach by generating lower system-wide supply chain network costs. The model formulations are extended by relaxing the assumption of no LTs between customers in the supply chain network. Similar to those for the no LTs configuration, the results for the LTs configuration show that the multiobjective optimization outperforms the decoupled optimization in terms of system-wide cost. Hence, it is economically beneficial to jointly consider all parties within the supply network. Further, we compare the model configurations---LTs versus no LTs, and we show that using LTs improves the overall savings of the system. It is observed that the improvement is mostly derived from reduced shortage costs since the equipment downtime is reduced due to the proximity of the supply.;The models and results of this research have significant practical implications as they can be used to assist decision-makers to determine when and where to pre-position parts inventories to maximize equipment availability. Furthermore, these models can assist in the preparation of the terms of long-term service agreements and maintenance contracts between original equipment manufacturers and their customers (i.e., equipment owners and/or operators), including determining the equitable allocation of all system-wide cost savings under the agreement.