Full Steel Carrying Capacity Meridian Tire Building Machine Of Two Drums

This article deals with the reformation of pre-compound Ml steel carrying capacity meridian tire shaper of two drums, which is fully based on absorbing the domestic and foreign advanced shaper technology, and the proposed reformation plan conforms to the enterprise actual environment.Through the reformation to the pre-compound full steel carrying capacity meridian tire shaper of two drum type, some technical issues which existed at the initial stage of the reformation have been greatly improved. After the reformation the entire machine production efficiency has been greatly enhanced, also half part can be saved. Because of the promotion of the automation, the status can be greatly improved that relied on the manual operation and therefore restricts product quality and efficiency. Also at the same time the high service rate of the original equipment is under good control.This article mainly deals with the reformation of the side wall and in the lining compound crooked transformation, and adjusts between the leaning organization in the side wall conveyer belt to increase holds the roller, replaces the sensor model to cause it to open the mouth to increase, installs the guidance roller on the compound carrier; Ultrasonic wave cutting tool transformation, under replacement knife board, change dinking die way and adjustment ultrasonic generator oscillation amplitude; Unloads the embryo transformation, changes the mechanical fingernail unloads the embryo for the roller barrel type and the change the way; The transmission link servo electrical machinery is easy the transformation with the ambulacrum which breaks, has carried on the solution from the procedure and in the transmission link driver parameter; The transformation which the main engine takes shape the drum light beacon moves when is easy to report to the police, took shape in the drum light beacon driver parameter from the main engine to carry on the solution; The redesign shoulder pad rubber for material, draws up the electrical schematic diagram, the compilation procedure, carries on installs the debugging.Through after this research topic thorough research, discovered still had some technical questions also to wait for further studies or the consummation,Specially big industrial production to equipment high request, also will cause to this topic findings to carry on the unceasing revision and the consummation, these work also will continue.