The Research Of Armored Vehicle Electronic Integration System Based On CAN Bus

This subject is designed based on the cooperate project of the electricty &control institute in ShangHai. On the basis of the development of armored vehicle electronic integration technology domain, aiming at the lower automatization level of domestic technology in the control system for armored vehicle, this paper introduces a control system based on CAN for it.The system takes CAN as the communicate network.The moudle deals with the collected information, then puts the control conmmand to other moudle to realize the control of the electricity equipment . At the same time, the system display the information which gets from the CAN bus to the virtual instrument.This thesis first analyses the demand of the system, explains some system function goals and required performance, then puts forward the designing overall frame and divisiory function modules. It also introduces the software and hardware design of the measurement & control system and the developing software method of the virtual instrument system in detail, then studies the development of communication protocol. Finally an abbreviated evaluation about the finished system is given, and suggests the idea of the system in the further contents and directions. In order to meet system's needsi enhance system's security, reliability and communication function, CAN bus technology and vitual instrument technology are applied to the armored vehicle electronic integration system, it also has the practical value for enhancing the level of our armored vehicle.