The Forming Mechanism Of The Stator And Rotor Core Of Disk Type Motor And The Online Compensation Control System Design Of Forming Process

This system has utilized sensor technology, automatic measurement technology and the communication technology and microcomputer technology , is on the forming mechanism of the stator core and rotor core of disk type motor on the foundation of the customization winding and rolling equipment , has realized automatic rolling and winding manufacture of the stator core and rotor core of disk type motor with online compensation control system. The system consists of serial computers , takes off low position computer to adopt an 89C51 microcomputer as conducted computer, which takes the responsibility for driving the power wheel around process - step motor, collects instantly the increasing actual radius value and actual corner value of the rolling-winding wheel, shows partially the parameters of the rolling-winding core and handles independently the emergency incident of processing system. Top position computer draws up the way of human-computer interaction, being the datum core, according to different core parameter , develops the processing control code, compensates error, regulates the deviation of the system, collects the datum and demonstrats the process of the animation rolling and winding at the right moment. Serial computers have realized the communication of datum through RS232.