The Assistant Design Software Research Of The Pneumatic Control Dock Gate

The door of this new kind is in general use which is controlled by compressed air whit the developments of the dock construction. At the same time, its kinestate is so complex to evolve study by physical analogue over a long period of time; As a type of mature software,"AUTOCAD"is utilized universally, especially in design field. Combining the both above, the software can reflect the value of the center of gravity and buoyancy, the total moment, rotary inertia etc. Otherwise, the routine calculation will make certain whether the cell design of dock gate is appropriate in the abstract and the state of rotation can be observed easily.This paper is based on the apprehension of the past theories and researches about pneumatic control double-sided gate of dry dock, and is explicated by hydraulic rationales and rising-and-falling mechanical principles. This software is developed by inner programming language in "AUTOCAD". It can calculate the total moment and rotary inertia respectively. In addition, this program system integrates the disquisitions and analysis on the dynamic characteristics about dock gate, in order to make the drawing and cabin design more visualizing. Through optimizing design procedure, the design and testing departments can achieve further conveniences by the holy poker. At last,this dissertation test and verify its rationality.In the past, there has accomplished a suit of rounded theories and design methods in a way. However, no corresponding practical project software, as things are, was developed to satisfy the necessity of the project of dock gate. It is imperative to develop programming module and carry through more scholastic pursuit about it. This article put much emphasis upon give expression to research achievements and design methods by the form of software, in an attempt to obtain the function of digital simulation.