Study Of Safety Management In Construction Of Combined Section Glass-wall

Recently with the development of the architectural industry and people's increasing demand of living environment, more and more glass-walls are applied to high buildings. In modern cities combined glass-wall is often used to the outside wall of a high building, especially in the connected part because it is much decorated and is full of change and variety. Combined section glass-wall has a large span; it is economical in resources and is good for environmental protection. Therefore it has flourish prospects to which we pay much attention. Beginning with the brief introduction about safety management development in combined glass-wall engineering, the problems existing in the architecture engineering safety management in our country and the characteristic in safety operation are analyzed in this thesis, the policy, the guiding principles, the management principles, management essentials, and manage methods are discussed. According to the practical experience in combined section glass-wall construction, I introduce the chief processes and their main safety management factors, so as to expound our responsibility, obligation and executive roll in engineering safety management. The chief processes includes safety control in producing materials and assemblies, safety control in transporting materials and glass, safety control in hoisting glass and assemblies etc.. It has not been long for us to apply and develop combined section glass-wall, so there is so much left to be researched. In order to strengthen construction safety management and decrease potential incident I suggest that we must strictly manage the construction institute, apply highly mechanical techniques, and take necessary safety-guards. At last some proposals of construction application and improvement method for combined section glass-wall are put forward.In this thesis the safety management in construction of combined section glass-wall is studied. some proposals of safety management in construction of combined section glass-wall and outside wall decoration are put forward. This thesis is of real significance practically valuable.