Development Of Key Processes Umbrellea Automated Production Line

Automated production line is composed of the workpieces transport system and control system, a set of automatic mechanism and auxiliary equipment linked together in accordance with the process sequence, automatically complete all or part of the assembly process of the production system. According umbrella production process, the higher the degree of hand-produced, low level of mechanization continuous production research status, proposed to design a complete process, research umbrella continuous production of automated production lines. This paper focuses on the key processes umbrella tail, umbrella beads automated assembly lines to study design.Firstly, the process of automated production lines, were studied, and the tail umbrella, umbrella beads automated production line process flow diagram presented several different options under the umbrella of automated production line process flow diagram, through the analysis of several different scenarios to determine the final plan, and then on the final design of specific programs. The main feature of the program is to achieve a uniform distribution of the three groups on the assembly line reclaimer unit, three devices at the same time to reach a predetermined position, improve the production efficiency of the automated assembly line.Secondly, automated assembly line according umbrella tail assembly18umbrella tail per minute, umbrella beads automatic feed means30feed per minute design specifications, of the critical dimensions umbrella automated assembly lines, the control parameters of components design calculations. This paper umbrella larger force automation assembly parts using Ansys were static analysis, and automated assembly lines calculated umbrella allowable stress of the material.Then, the umbrella assembly line automation control systems research, has developed automated assembly tail umbrella, umbrella beads automatic feeding device for controlling the flow of the program. Determine the25control objects umbrella tail automated assembly line, the umbrella for the four control beads automatic feeding device object, and then allocate resources to control object I/O port on the PLC controller, and finally draw the umbrella assembly line automation PLC electrical wiring diagram.Finally, the umbrella automated production line test, carried out part. of the program feasibility, reliability and control program verification.