The Research On The Decoration Art Of Bamboo-rattan Furniture And Its Join

With the improving of people's living standard, people pay more and more attention to himself. "The green health" becomes the universal pursue of people. Bamboo and rattan have been the fine useful material of furniture for its natural environmental protection, the physical performance of tenacious and the rich elastic as well as the characteristic of fast-growing to a useful adult. The bamboo-rattan furniture caters to people's intrinsic demand of returning to nature and pursuing individuality by its plain manual technique. In the international scope, the bamboo-rattan furniture is continuing to develop. China is the country which uses bamboo-rattan most early. The bamboo-rattan furniture has the extremely glorious story in China. In recent years, the domestic bamboo-rattan furniture industrial had some development, but overall, still delayed relatively, adapted the demand of market and industrialization with difficulty. Thus, on the basis of inherits with carrying forward in the traditional technique foundation, it appears especially the significance to be profound with using the modern science and technology, developing the new type bamboo-rattan furniture unceasingly, realizing the large-scale industrialization manufacture, satisfying the general market demand.There are two parts in this paper which are the decoration art and the joint method of bamboo-rattan furniture. In the decoration art aspect, systematically summarized the basic type of our country traditional bamboo-rattan furniture, then proposed some new decoration methods, which cause it perfectly and useful to the modern industrialization manufacture.The joint method of bamboo-rattan furniture has the key effect for realizing its industrialization mass manufacture, the storage and the transportation process. This is the focal point and the innovation which this paper discusses. At present the joint method of bamboo-rattan furniture mainly uses the traditional method of tieing up, which causes the production efficiency low, the production cycle long, the transporting difficulty, the storage reservoir large, the transportation cost to be high and the product damage rate high, these have restricted the development of the bamboo-rattan furniture enterprise seriously. Therefore, this paper has discussed thoroughly the disassemble and assemble part of the bamboo-rattan furniture, According to the function of furniture, the original furniture was divided in three kinds of part form that is the plane component, the curved surface component and the striation component. and classified these kinds of part form systematically. Each kind of part may use traditional structure, decoration art and manufacture craft; Simultaneously also has the flexibility which the modelling changes, may realize the flexible production by using the modern equipment.The bamboo-rattan furniture can realize the collapsible structure with realizing the part manufacture and using the special metal bridge piece. Therefore, especially designed five kind of types new metal bridge pieces which were the bridge piece of the bolt linking up, the agnail nut bridge piece, the "L" cambered surface bridge piece, the sleeve bridge piece, and the metal covering foot, and has determined the joint parameter of these initially, thus could safeguard the implementation which the bamboo-rattan furniture disassembled and assembled.At the same time, this paper also has discussed the design principle of bamboo-rattan furniture systematically, summarized the type and the performance of bamboo-rattan which often was used in bamboo-rattan furniture. Has provided the reliable theory basis and the selection material for the design and manufacture of the bamboo-rattan furniture.