Gear Electrochemical Mechanical Finishing Mechanism And Application Of Technology

AbstractNow there is a common problem in mechanical engineering industry,chemical industry,aviation,light industry and so on. That is, on the base of Ra3.2~-6.4 μm to finish the surface directly and make its roughness less than Ra0. 1 i.i m with high productivity and well surface quality. Mechanical Finish Machining has the question of low productivity and high cost. Therefore, it can't satisfy the practical production.This paper discusses mechanism of Electrochemistry Mechanical Finish Machining technology. In the paper every main machining parameters, which affect finishing results, are ,analyzed. optimal machining parameters are selected by orthogonal experiments. Now Electrochemistry Mechanical Finish Machining of plane -. outer-cylinder had been deeply researched and had a high quality. But we should do much more work in the complicated surface. To Machining the great important part gear by Electrochemistry Mechanical Finish Machining, we discuss the principle and also design two implements. The author compares and analyses the results of Experiments, and point out advantage and disadvantage of the machining. The author put forward his own unique opinions for the future amendment of this technical.