This paper designs a monitoring controller based on MSP430F149 MCU for a diesel generator. It expatiates on the designs of the hardware and the software of the system. At the same time, anti - jamming methods about software and hardware is discussed in the paper. During writing the paper, the following work has been done:1) Presented the main parts of a diesel generator, and analyzed the requirement of the controller.2) Completed the whole design of the system.3) Completed the selects of the devices, and the design of the hardware.4) Studied the samplings of voltage and current, and the calculation of the electric power, and worked out the arithmetic.5) Analyzed the cause of the jam in the monitoring controller, and gave out anti-jamming methods, mainly in software. |