Helping To Define The Boundaries Of The Archaeological Strata Test Research And Development Of The Alarm System

The Important of archaeological field work is divided into strata, in order to provide a reliable basis for the age of archaeological finds relations. Stratigraphic classification methods of archaeological stratigraphy with the development of mature content, while, continuing to explore methods of stratigraphic division and make it more perfect is always the goal pursued by archaeologists.For a long time, earth tones, and the changes in soil strata are the main basis for classification, the malpractice of this method is:when the two features are very similar, they will bring doubts to the staff judge, then just take other ways to jointly determine if combined with flat profile, sach as archaeological finds-type changes, the temporary ID law. Inevitably, this approach has relatively strong subjective and complicated process. This dissertation provide theoretical analysis and a series of field measurements, based on the summarized measurement data. Meanwhile, use the statistics and geometry knowledge to create a "system error" model to solve the problem, that is:change the formation of the measurement value exceeds the level of the same range of measurement bias. By archaeological detection, measurement inspiration, we found that the soil resistance is the best measure of this model selection theory of reference. At the same time, According to this model of this theory, this article has developed a smart alarm system testing, so that the "bias system" model theory can be achieved, and simplified the practical judgments on similar problems about actual excavation, and provide objective and accurate reference standards for theThe division staff judge. In addition, this "bias system" model theory is also suitable to solve the two pits, or other archaeological remains mixed with each other to break the region when the determining ownership, thus broadening the use of the system.Because it is using the same measurement, the measurement method itself caused by the measurement error or other error in the process of instrument offset, which is also this system and principles for conducting feasibility analysis of an important basis for development.