Research Of BiB Liquid Flexible Filling Technology

Box in the bag filling machine is the special bags for packaging box structuredevelopment and design of special filling machine,bag packing box structure,the form of a bag filling machines and packaging materials is an important design factorto be considered. Box in the bag filling machine different from the important featureis a device to take cover,for different bag sizes adjustable filling volume, designedfor flexible valve seat structure and the filling valve connections, and for materialswith particle filling. Therefore, this filling machine at home and abroad on the basis of design, materials with particles box for bag filling, bag filling machine box designwill take a cap structure, measurement devices, filling valve structure, pneumaticcontrol systems, and the use of FLUENT software to optimize the structureparameters of the filling valve port, the use of three-dimensional solid modelingsoftware PROE.The subject of the theory and design of the filling machine mainly include the following elements:(1) Physical properties of materials containing particles based on the analysis,analyzed and summarized the existing bottling technologies and methods to determine the box in the bag filling machine filling process, and design filling machine filling machine filling process analysis and the overall design andequipment selection.(2) The structural design of various components of the filling machine, filling machine for filling valve design, take the cap structure of the system, complete liquid filling,and filling the necessary products to take cover, install the cover design.(3) Filling machine calculation of basic parameters and optimization, analysis and optimization software based on fluent spool descent, and on this basis calculated on the spring spool filling machine, open the valve springs, fluid piping, infusion pumps,valves end hole port and other parameters.(4) Box in the bag Proe modeling, structural design and the parameters in thecalculation, based on the three-dimensional modeling of the various parts and the assembly, all parts of the installation layout to ensure that individual components do not interfere with each other, come to a reasonable machine design.(5) Control system design, development of basic technology in the filling, the filling process required to complete the filling, take cover in the various movements,design of pneumatic filling machine control system.