Key Technology Research Of Two Plate Full Hydraulic Injection Molding Machine

Injection molding is one of the most important methods for plastic molding processing. Injection molding machine, a injection molding equipment, is mainly composed of four major components:injection unit, clamping devices, hydraulic systems, electrical control system. The template of the injection molding machine injection molding machine is extremely important. It can reliably ensure the locking of the mold. It is the key components of the injection molding machine. The clamping device is the most critical mechanical components of the entire injection molding machine, which is directly related to the implementation of various actions throughout the injection molding process. So the clamping hydraulic system performance of injection molding machine directly affects the overall performance and the quality of the final product. In this thesis, the two-plate injection molding machine being developed by the company of Zhoushan Golden Eagle Presses is the object of study, combined with computer simulation analysis, based on the simulation of finite element theory of statics and hydraulic simulation software AMESim system simulation as the theoretical basis, around two plate injection molding machine to analyze and research. The contents of the chapters are as follows:In chapter1, introduces the background and significance of the subject, summed up the injection molding machine template design and optimization of Research on the performance simulation based on finite element theory and structural optimization methods. Summarizes the development status and trends of the injection molding machine clamping device, and discusses the research situation and development trend of the injection molding machine hydraulic technology. Put forward the main research content and overall structure of the framework.In chapter2, pose the basic assumption of a two-plate injection maneuver template force status, do the template statics analysis by using ANSYS finite element analysis software. According to the results of the analysis, designed to improve the topology, and analyzed verification through simulation.In chapter3, first, introduce two plate injection molding machine clamping device. And pose a proposal of two plate injection molding machine clamping device of the hydraulic system. Starting from the system energy efficiency, contrast to several system solutions built to simulate, analyze their energy consumption and the advantages and disadvantages.In chapter4, set up a test system based on ARM embedded injection molding machine temperature. First describes the overall framework of the test system. Then present the temperature test system hardware of the injection molding machine, including the choice of the temperature sensor, The AD7711temperature measurement, the choice of ARM processor. Finally, the injection molding machine temperature test system software design, including Web services design and development of the local QT program.In chapter5, summarizes the research of this topic, template optimization and hydraulic system design and temperature test system there are still some. And show an outlook on future direction of development.