Designing And Weaving Of T-Shape Tube Three-dimensional Woven Fabric

T-tube three-dimensional woven fabrics made of composite materials with bettercorrosion resistance than the ordinary metal pipe products, anti-aging, can partiallyreplace the stainless steel pipe, with a lightweight, high strength, corrosion resistance,durable, convenient features, and therefore can be wide range of applications in thecivilian industry, construction and military industry.The main subject of the skeleton method in the production of ordinary sheet fabricJacquard loom woven T-tube3D woven, fabric design and weaving techniques. Jacquardloom woven fabrics planar structure requires the use of the "flattening-weaving-reduction" method, the T-tube squash for the planar structure, design a T-tubecorresponding planar structure, but the T-tube distraction from planar tothree-dimensional shape in two intersecting lines at the occurrence of wrinkling, to makethe tube forming a good, subject to the organizational structure of the design make thefabric elongation and appropriate fabric contour solve the problem of T-tube fabricwrinkle in the process of distraction, the zonal wire design of the table-for-layer fabricelongation up to about20%; research the contour of the two fabrics design a hypotheticaldeformation fabric within the contour of the fabric size is the same, and the other doesthe reverse, after analysis found that the second solution is more accurate, more help pipewrinkle-free distraction, to prove The fabric in the fabric contour deformation is different.Finally passed the test woven on a Jacquard loom inthe weaving process, problems andsolutions.