RFID Technology In Volkswagen Homemade Stamping Parts Production Application Of Information Technology

The rapid development of competition in the automotive industry in the contextof an increasingly motivate the various car manufacturers are in the pursuit ofmanagement system optimization. From the beginning only the pursuit of the optimalend result, to the current requirement to make every aspect of the car manufacturer toachieve optimal objective, which gives managers raised a serious problem, and howyou can control the production process in detail, to make the production process asmuch as possible of the information record. Through the analysis of production data,and ultimately to develop the production process ambassador to the optimal solution.So that enterprises in market competition advantage.As a first step in stamping vehicle manufacturing, the quality of the vehicle playa crucial role. Stamping homemade pieces stamping plant production is the corework, stamping workshop production of stamping parts, mostly homemade coverthe outer surface and an important structural parts of the vehicle ’s appearance andoverall a great influence on body size, so stampings made pieces production processto the parts quality strictly, but also improve the efficiency of the production line, soas to make the stamping plant efficiently.Faw-volkswagen stamping existing warehouse management style has beendifficult to adapt to many varieties, high-volume production logistics requirements. Alot of production data needs to be aggregated and analyzed these data statistical workrequires a lot of manpower and statistical data are mostly complete information lagproblems exist for the problems found in the production process can not make timely corrective measures, and labor statistics project a single, hard to find a correlationbetween multiple problems. Also available as factory plant fewer logistics area, thecorresponding constraints generated by the logistics more and more problems, youmust change the existing way of logistics, the introduction of information technologyin order to adapt to fast-paced mode of production logistics requirements.Radio frequency identification rfid is the acronym for radio frequencyidentification. The main characteristics of rfid large-capacity information storage,non-contact remote information read erasable, reusable, environmental adaptability.These characteristics are very suitable for rfid in the vehicle used in the productionprocess, it is in the materials and product tracking on the role of the automobileproduction logistics tremendous impact. Rfid technology in the field of automobileproduction has been widely used, but due to the characteristics of its own press shop,rfid technology in the production of stamping parts made in the application ofinformation technology to be improved.Rfid technology is the solution to the current problems of the effective means ofstamping. Stamping plant rfid system hardware configuration includes datacollection, rfid reader, barcode printers, and rfid tags. By using rfid quick scan,accessible reading, etc., can be quickly and accurately for data collection andprocessing, and management standardization and efficient.Rfid systems can press shop stamping out real-time recording storage conditions,the query stampings inventory, supply parts for other workshop, to achieve in-timedelivery, reduce unnecessary inventory waste; monitoring from the blank sheetprocessing to finished parts out libraries throughout the stamping production.Through long-term good parts, repair parts, scrap pieces of statistics can becalculated more accurately the cost of a single part. Through data analysis to identifyvarious aspects affecting the efficiency of production, where there is waste for amore rational and efficient use of available data to support stamping production line, so that the cost of the enterprise stamping manufacturing sector more transparent. Byapplication of rfid technology in the stamping plant, is the original work ofcumbersome and complex statistical information becomes simple and transparent,through long-term and statistical data accumulated through long-term dataaccumulated and statistics, found that companies in the production process, the steelplate material usage. Equipment operation rate has problems, and make real-timeadjustments to make it competitive in a rapidly changing market advantage. Byguiding the daily work of information, such as production scheduling, maintenanceplanning, analysis of the data on the information to identify problems, follow-upwork better improvement.Future in the automotive companies, rfid technology will be more widely used,stamping made pieces of information management will also be more complete.Anytime, anywhere, full information traceability will become a reality.