The Design Of The Lean Shipbuilding Mode Planning Management Research

With the advent of lean manufacturing how to implement the lean design through the design plan management, eliminate invalid design process, establish scientific design planning method, and through the design quality of dynamic regulation of design plan, the pursuit to optimization the design cycle, more and more get the attention of the ship design company. A design company usually adopt the independent design phase of planning design, the design stage input, output, time interval between long, Bad correlation and logic cause the design cycle cannot be compressed, plans are enforced is poor. Corresponding rate plan is not enough, no plan to form effective adjustment and evaluation system.In this paper, based on the research of the design project management, lean design idea, will be the original serial to parallel design pattern design, detailed design stage of tertiary design review, the detailed design O version design diagram design input, output and production process is optimized, the design of the critical path is established. By the method of multistage design collaborative project management to design task of the design phase of working hours, to determine the order of the relationship between design tasks, using tertiary stage design between input and output of the synergy between all the professional and collaborative design, collaborative network planning of multistage design modeling, the method of calculating the single stage through the multi-stage model. Using the method of quality control, to find out the design change single error rate that is drawing the relevant plans, and through the related analysis method to identify the cause of the plan and the change of single correlation, dynamically adjust the planning cycle, make the plan more reasonable. And through the quantitative assessment of the plan, strengthen the plan are enforced. Design plan management research in ship type, for example, using to shorten the design cycle, improve plan are enforced, and greatly enhance design efficiency has a good effect.