Study On The Passive Regulation Technology Of Indoor Thermal And Humidity Environment In The Maritime Silk Road Museum

China is an ancient civilization with a long history of 5000 years.It has a wealth of historical and cultural resources.The Maritime Silk Road was not only a road of trade,but also a road of dialogue,the meeting of ancient civilizations of the East and West,and a road of communication The "Sea of Dunhuang" said the shipwreck "the South China Sea No.1",Such as the ancient masterpiece,comparable to the Western Silk Road on the Dunhuang Flying murals,recorded a Millennium legend.With the continuous development of China's archaeological work at the site,display and protection of the main contents of the museum will also be increasing.Site protection for Ruins Museums are not only needed to meet the demand for the protection of the site,but also to create a good indoor thermal and humidity environment.In Lingnan area of China,damp and hot climate conditions pose new challenges for museum design.Museums must provide a good environment for the display and protection of cultural relics,while also needing to maintain the proper indoor temperature and humidity to maintain the archaeologists' and tourists' comfort.Many museums use equipment to maintain consistent humidity and a relatively stable environment,which increases the energy consumption of the museum.In promoting the development of science,the contradiction between maintaining proper indoor temperature and humidity and the energy consumption of the museum is becoming increasingly prominent.Therefore,this thesis combines original architectural design,taking the point of view of the indoor temperature and humidity,to apply passive design strategies,combined with the characteristics of the climate and regional of Lingnan area,to discuss and research heat and moisture of the museum indoor environment passive technologies.This paper combines the study and practice of the architectural design,from the perspective of passive control technology,combining with the design scheme of the original knowledge construction and construction technology,the thermal environment of the maritime Silk Road Museum indoor passive study.This regulation explains building passive design,development and construction of indoor thermal site museum the environment in recent years,with the passive insulation of public buildings incooling design strategy in Lingnan,principle and practice of roof ventilation from traditional dwellings in Lingnan,expounds how to use the air between the heat and moisture of the museum archaeological area of indoor thermal and humidity environment regulation.The author established physical and mathematical models of air layer describes the heat transfer process between layers,simulation and analysis of simulation results were compared on different computer numerical scheme based on Ecotect?Phoenics and Fluent software.In solving the practical problems,in-depth study,sum up experience,have some breakthrough in practice,and provide the reference for the design of the future site museum.