Research On The Automatic Loading And Unloading System Of LZ10 Wire Drawing Machine

Wire rope is widely used in energy,military,mining,transportation,oil drilling,aerospace and other important fields.At present,the domestic wire rope enterprises still use the traditional wire drawing machine to complete the wire drawing operation.The process of wire drawing and changing plate is completely completed by manual operation.The process of changing plate is cumbersome,the labor intensity of workers is large,the speed of changing plate is slow,and the production efficiency is low.Therefore,the automatic transformation of wire drawing equipment has become a difficult problem to be solved in wire rope manufacturing enterprises.This topic in xianyang gem steel rope co,LTD,production status,combining LZ10 straight into type wire drawing machine working environment and technical requirements,analyzes the development present situation at home and abroad on footwall drawing machine automatic system,according to the company's existing wire drawing equipment,puts forward a new method of automatic footwall,according to a new method to design a kind of wire drawing machine automatic loading and unloading device and new wheel.From the overall scheme,structural design,dynamics,statics and control and drive system design and research,using UG software to establish the drawing machine automatic upper and lower plate equipment and a new type of the three-dimensional model of the I-disk.To verify the safety and reliability of the disk wire drawing machine,the model into ANSYS software erify that the structure of the strength,stability and safety,and simulation in UG environment for wire drawing machine automatic disk change trajectory dynamics simulation and optimization design,through movement function motion parameters of moving pair,adjusting the simulation parameters,accurate implementation dish-row of line drawing the automatic working process of the disk change.According to the working principle of automatic loading and unloading of drawing machine,the control program design of automatic loading and unloading system of drawing machine LZ10 is completed by using Siemens programming software.