Mobile Road Illumination Detection System

With the rapid development of LED industry,China’s road lighting ushered in a new era of renewal,high-pressure sodium lamp and other traditional street lamps are gradually replaced by LED.The quality of road lighting environment in the renewal is the key to ensure the safe travel of citizens.Road lighting detection is an important means to ensure the quality of road lighting environment.It is of great significance to accurately and quickly detect the parameters of road lighting environment.At present,in the national standards related to road lighting,the detection of road light environment is carried out around the artificial point detection.However,the detection efficiency and accuracy of the traditional manual point detection are low,and there are certain security risks,so there is an urgent need for optimization and upgrading.In view of the problems existing in the traditional artificial distribution detection of road lighting,a mobile road illumination detection system is designed in this paper.Taking the illumination detection car as the carrier,according to the basic requirements of road illumination measurement in the national standard of road lighting in China,a mobile road illumination detection method suitable for this system is designed.In this paper,Arduino is used as the control core,raspberry pie as the data processing and transmission core,and the illuminance detection car is designed.The illumination detection car is equipped with gy-30 digital illumination sensor and GPS module.The collected illumination data and positioning information are sent to the server through Wi Fi.The server processes the data visually and displays it on the visualization terminal.The illumination detection trolley is controlled by 2.4G remote control,the traveling speed of the trolley is controlled by deceleration motor,and the traveling direction is controlled by differential steering,so as to ensure that the trolley can accurately carry out the mobile road illumination detection method.After the optimization of the experiment and the improvement of each function of the system,a section of school road is selected to carry out the traditional artificial distribution detection and the mobile road illumination detection.The results show that the mobile road illumination detection has the advantages of high detection efficiency,large amount of data,high accuracy and ensuring the safety of the measurement personnel compared with the traditional artificial distribution detection.