Research On Construction Safety Management Of Assembled Bus Parking Lot

Nowadays,the public transportation situation in China is severe,and it is necessary to vigorously build a three-dimensional parking lot for public transportation to effectively alleviate the pressure on public transportation.In the construction process of the threedimensional parking lot of the bus,there are many hidden dangers in the cast-in-place system,and it is urgent to improve the operation method to promote the construction and development of the three-dimensional parking lot in China.At present,the fabricated structure has been widely used in residential buildings,factories and other buildings.Its construction process is simple,its seismic performance is good,and its environmental protection and other advantages are also recognized by the industry.However,it has not yet been applied in the construction of public parking lot parking lot.This paper firstly refers to the research work foundation of the safety management of the fabricated structure construction by many scholars and industry insiders at home and abroad.Through the inductive analysis of the literature review,the development status of the fabricated structure at home and abroad is understood,and the assembly is studied on this basis.The feasibility of the application of the structure in the construction of the bus three-dimensional parking lot,through the interviews with the field experts,to understand the current status of the safety management of the assembled structure construction,combined with the actual construction of the bus three-dimensional parking lot,summed up the assembled structure for the bus three-dimensional The restrictive factors in the construction of the parking lot,and in view of the existing safety management problems,the countermeasures for the safety management of the assembled structure of the public parking lot are proposed.