Research On Standardization Workpiece Bank Of Plastic Mold Based On Network

By analyzing our country mold industry situation and trend including factory and the number of employee and the production gross valued and comparing the domestic with the foreign on the research situation of plastic mold, you may know the standardization of mold part and moldbase must be taken action. At present, when the economy global and multinational is going on and the domestic plastic mold manufactory are facing this rigorous situation, the standardization of plastic mold seem to be important very much on the way to how to slower the production cost and shorter production delivery time and enlarge production scale and improve plastic mold quality. Information is an outstanding symbol of economy global and multinational. According to this thing the paper brings upon the research on standardization workpiece bank of plastic mold based on network.By analyzing the present rather stylish relative technology of Jsp andJava Servlet and J2EE and the second development tool and each function module and on the basis of analyzing and classifying standard part of mold and structure and type of moldbase and main parameters which consist of a moldbase, The assemble moldbase model based on mold border is put forward. Series of moldbase will be realizing by the replace basic module; the size change of moldbase type will be realizing by the way of parameter. According to this and combining the second development tool and module of function, the soft of standardization workpiece of plastic mold is developed, which is one of my application innovation.