Application And Study Of Refitting On Turning Center AT-600 B₂

This article first has made the simple introduction to the current numerical control technology development, unifies AT-600B₂ the characteristic, and the angle which transforms from the practical application and the equipment embarks, has conducted the thorough careful research to Siemens SINUMERIK 840D in AT-600B2 turning center numerical control transformation concrete application ,the work content as follows:1st, The topic unifies actual characteristic of the AT-600B₂ turning center numerical control refitting , studies and analyzes the software and hardware structure of SINUMERIK 840D numerical control system, and has given the further explanation to its function and the principle.2nd, According to the machine control request, This article has given detailed showing to the transformation procedure design of servo from the numerical control transformation angle, has made the detailed elaboration of 611D motor selection, servo design and the adjustment3rd, This article combines the characteristic of the AT-600B₂ turning center , has carried on the PLC software and hardware design, analyzed the edition of the Alarm report , and analyzed the main thought and the method of the tool store design with emphasis.Through to the AT-600B₂ turning center numerical control technological transformations, the precision of the AT-600B₂ turning center is achieved and surpassed the original equipment, is fit for the request of machine.