The Design And Research Of The Numerical Control Laser Film Pieces Machine

The laser is processed because it is not exposed to the advantage such as being high and wide of processing,machining accuracy with the scope of application,already more and more one is applied modern industry every field. The starting and is later than for about 20 years of developed country of Chinese industry laser market, but the rapid development because of China's economy, market demand has driven the laser to process the development of the industry.The laser is processed to rely on the laser to process the equipment,the level of its engineering level representative's laser processing technology mainly. The performance of the equipment that the laser is processed is after laser instrument and mechanical movement device are confirmed,key indexes,such as systematic function,precision,processing the technological level,etc. are decided by control system mainly.The countries,such as the United States and Japan,etc. have been classifying it as the key development goal all the time,are becoming the focal point that this field of our country is being studied too.This text is on the basis of analysing in depth, judge the machine of slice after designing the laser, has finished mechanical system and design of the optical system of it. The processing system is on the basis of inheritting the traditional laser carving machine transmission and light source to design, innovative laser carve head whirling degree of freedom very, is it realize slope cut out block to enable this processing system, namely in process material must is it under the certain situation that angle put,can satisfied with the request of processing too to slope.This text has also analysed that the whole speculum type optical system will accumulate some shortcomings and deficiencies on certain error in the course of mere spread, and provide with the coupler and can spread the scheme that the optic fibre replace,and has analysed. NC film on the laser-cut pieces of software systems and hardware to do an in-depth structural expounded.Having studied the kind characteristics of optic fibre and optic fibre, and the kind to the laser and processing characteristic of the laser have been described.